Sensormatic Intellex Instrucciones de operaciones descargar pdf (Pagina 81)

Intellex RMS Digital Video Management System

Setup Options 65

Click OK to accept the changes made. Click Cancel to cancel the changes. Click Help

to display online help for this screen.

Gain Mode Tab

Use the Gain Mode tab to change the gain level in order to correct video that is too

bright or too dark. Using twisted pair wire to connect cameras to the unit may result

in video that is too dark. To correct for brightness or darkness, reduce or increase the

Gain Mode setting.

In the pull-down box to the right of a camera name, select one of the following Gain

Mode settings:

After you select a Gain Mode setting, all associated values, such as luma and chroma

gain, are adjusted automatically as needed for each setting. Gain Mode settings are

communicated to any connected Network Client application.

Camera Control Tab

Connection between the Intellex unit and the dome requires an EIM and Touch

Tracker. Supported domes include the following:

• SensorNet-connected SpeedDome (Ultra IV, Ultra V, or Ultra VI when available),

and

• Optima (and compatible domes such as Ultra III) with firmware version 3.05 or

later.

Remote control functions include Dome Select, Pan, Tilt, Zoom, Focus, Iris control and

Call Preset.

NOTE: Before you change any Camera Control configuration settings in the Intellex

unit, you must first connect the Touch Tracker to the Intellex unit in accordance

with the Touch Tracker installation instructions. Refer to the VM16 Plus

Enhanced Touch Tracker Installation Guide, part number 8000-2672-01.

You must configure each of the cameras that will be controlled through the Intellex

Setup function.

Reduce Gain Use to reduce brightness or color bursts.

Normal Use for video that is acceptable. This is the default

setting.

Boost Gain Low Use Low for twisted pair wire up to 500 ft. (152 m)

Boost Gain Medium Use Medium for twisted pair up to 1000 ft. (305 m)

Boost Gain High Use High for twisted pair up to 1500 ft. (457 m)

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 237 238

Sin comentarios

Sensormatic Intellex Instrucciones de operaciones Pagina 81