Sensormatic Intellex Guía para resolver problemas Pagina 23

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 190
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 22
Intellex Digital Video Management System
Quick Reference Guide 21
3. As the Intellex unit restarts, press the F2 key several times until you see the Enter
Password screen. Type xellet and press the Enter key.
4. Using the arrow keys on the keyboard, select BOOT.
5. Use the arrow key to move down, select Boot Device Priority, then press Enter to
make this selection.
6. Press the Enter key again to select 1st Boot Device, then select ATAPI CD-ROM.
In the menu, press Enter.
7. Press the Esc key, and use the arrow key to select Exit at the top of the screen.
8. Press the Enter key, and at the prompt “Save configuration changes and exit now
select YES.
9. The Intellex unit will now reboot and start to load the system disk from the
Recovery CD.
10. Replace Recovery Disk 1 with Recovery Disk 2 when prompted to do so.
11. When the recovery process is complete the Intellex unit will reboot. Messages may
appear when new hardware is detected and the unit may then need to reboot
additional times. If you are prompted for files to install video cards or other
hardware, browse to the C:\WINNT\System32 or C:\WINNT\System32\Drivers
folder.
12. The Intellex application will display a message about entry of license key
information. Enter the License Key and select the correct OptionPacks to enable
Intellex to run. The License Key is printed on the inside of the media bay door.
13. Reconfigure your Intellex (Network settings, time zones, schedules, camera
names, etc.) and the unit is now ready for use. Use the Storage Setup to add the
existing storage volumes to the database.
Important Information for PAL Video Users
The default video standard for this upgrade is NTSC. Perform the following steps to
configure your Intellex unit for PAL video:
1. BEFORE entering the Intellex 3.1 License information, click on NO at the license
message dialog to exit to the Windows Desktop.
2. Double-click on the PAL icon to select PAL mode. Click on YES to update the
registry.
3. Double-click on the Intellex icon to return to the license message dialog and then
click on YES to enter the Intellex 3.1 License information.
Vista de pagina 22
1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 189 190

Comentarios a estos manuales

Sin comentarios