Sensormatic VM96 INS Manual del operador descargar pdf (Pagina 71)

Using the On-Screen User’s Menu 4-15

Remember, you can define up to three Patterns for each programmable

camera. If all three Patterns have already been defined for a camera, you

can re-define one of the existing Patterns.

4. Do one of the following:

· To define a new Pattern, highlight New Pattern, and then press

Menu.

· To re-program an existing Pattern, highlight the appropriate Pattern

in the list, and then press Menu.

· To exit the programming mode, highlight Cancel, and then press

Menu.

5. The screen displays the following message:

Position the camera to the start of the

pattern.

Press ACK when done

Press CLEAR to cancel

6. As the prompt indicates, position the camera to the starting point of the

Pattern. Then if necessary, zoom in or out, focus near or far, and adjust

the iris. When you have the picture you want displayed on the monitor,

press

Ack.

As soon as you press

Ack, the Pattern begins recording.

The screen displays the following message:

Move the camera in the desired pattern.

Press ACK when done.

Press CLEAR to cancel.

7. Move the camera around and create a logical, usable Pattern.

Remember, the three Patterns for this camera can collectively

incorporate up to 98 camera commands. Each Pattern can be up to 409

seconds in length. The command count is displayed on the LCD as you

move the camera around, zoom, and focus.

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 121 122

Sin comentarios

Sensormatic VM96 INS Manual del operador Pagina 71