Sensormatic VM96 INS Manual del operador descargar pdf (Pagina 74)

4-18 View Manager 96 Operator’s Manual

must be less than one revolution of the SpeedDome LT for the Auto

Pan to work properly.

· Although VM96 will prompt you to preview the Pattern, this

function is not supported on the dome. You should press the Clear

Entry button when prompted to preview the Pattern.

· If you attempt to program another available Pattern number for the

dome, VM96 will take you through the motions of the programming,

but the new Pattern will not be saved. Do not attempt to program

more than one Auto Pan per SpeedDome LT.

· If you need to re-program the Auto Pan for the dome, you must

select the Pattern number that was originally programmed. Selecting

another available Pattern number will not change the previously

programmed Auto Pan.

Refer to the section titled “Defining A New Pattern” for instructions on

creating the Pattern that will program the Auto Pan feature.

Running a Pattern

Remember, you can run a Pattern directly from the TOUCH TRACKER keypad

by pressing the Pattern number and then pressing

Patrn. If you cannot recall

the Pattern number, follow this procedure to run a Pattern.

1. Press

Patrn on the keypad to display the list of available Patterns.

Each Pattern has a unique number associated with it. A list of existing

Pattern names and their corresponding numbers is displayed. Figure 4-8

illustrates a sample Patterns screen.

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 121 122

Sin comentarios

Sensormatic VM96 INS Manual del operador Pagina 74