Sensormatic SpeedDome Ultra IV Manual del operador descargar pdf (Pagina 18)

2-4 Operator’s Manual

• If you want to make changes to other settings, use the Tilt control to move the

highlight bar to Exit, then press Focus Far. The Dome Configuration Menu

appears. Continue with What To Do Next on page 2-5.

Changing the Maximum Zoom Setting

1. Select Pan/Tilt/Zoom Options from the Dome Configuration Menu.

2. Use the Tilt control to move the highlight bar to the Max Total Zoom X setting.

The values for the setting are: 32X, 48X, 64X, 80X, 96X, 112X and 128X magnification.

The default setting is 64X.

3. Press Zoom Out to decrease the value of the setting.

Press Zoom In to increase the value of the setting.

4. Do one of the following:

• If you want to make changes to the flip setting, refer to Setting the Automatic

“Flip” Feature on page 2-2.

• If you want to make changes to the first zoom stop, refer to Setting the First

Zoom Stop on page 2-3.

• If you are finished making changes, press and hold Iris Close, then press Focus

Near or Focus Far to save your changes and exit the utility.

• If you want to make changes to other settings, use the Tilt control to move the

highlight bar to Exit, then press Focus Far. The Dome Configuration Menu

appears. Continue with What To Do Next on page 2-5.

This command is not supported with Manchester.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 75 76

Sin comentarios

Sensormatic SpeedDome Ultra IV Manual del operador Pagina 18