Sensormatic SpeedDome Ultra IV Manual del operador descargar pdf (Pagina 44)

On-Screen Text Display Settings 5-3

Note

Displaying status information is separate from displaying name

information. If Disable All Names? is set to Yes, the status

information will still appear if Status Display is set to On.

To change the setting:

1. Select On-Screen Text Display from the Dome Configuration Menu.

The highlight bar appears on Status Display.

2. Press Zoom Out or Zoom In to change the setting.

• If you want the dome status information to appear on the monitor, choose On.

• If you do not want dome status information to appear on the monitor, select Off.

The default setting is Off.

3. Do one of the following:

• If you want to change the types of name information displayed, refer to

Displaying or Hiding Name Information on page 5-3.

• If you want diagnostic information to appear when the dome resets, refer to

Displaying Diagnostic Tests During Reset on page 5-6.

• If you want to assign names to the dome, areas, presets, patterns, or alarms, refer

to Assigning or Changing Name Information on page 5-7.

• If you want to change the text information appearance, refer to Changing Text

Display Attributes on page 5-10.

• If you are finished making changes, press and hold Iris Close, then press Focus

Near or Focus Far to save your changes and exit the utility.

• If you want to make changes to other settings, use the Tilt control to move the

highlight bar to Exit, then press Focus Far. The Dome Configuration Menu

appears. Continue with What To Do Next on page 5-12.

Displaying or Hiding Name Information

The dome provides the ability to display the dome name, the area where the dome is pointing,

the name of the preset or pattern that is running, and alarm names. When the display of

camera or area names is enabled, the information appears on the screen continuously. Preset,

pattern, and alarm names appear only while they are active.

This command is not supported with Manchester.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 75 76

Sin comentarios

Sensormatic SpeedDome Ultra IV Manual del operador Pagina 44