Sensormatic SpeedDome Ultra IV Manual del operador Pagina 61

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 76
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 60
DOME NUMBER: ___________________ LOCATION: ________________________
A-2 Operator’s Manual
Pan / Tilt / Zoom Settings
Menu Item Default Setting (Choices) Current Setting
Proportional Flip Off (On / Off)
1st Zoom Stop X 24 (16 / 24)
Max Total Zoom X 64 (32/48/64/80/96/112/128)
Camera and Lens Functions
Menu Item Default Setting (Choices) Current Setting
Line Lock On (On / Off)
AGC Mode On (On / Off)
AGC Gain* (0-1128)
Auto White Bal On (On / Off)
Red White Bal** (128 -1023)
Blue White Bal** (128-1023)
* AGC Mode must be set to Off to use this setting
** Auto White Bal must be set to Off to use these settings
Alarm Actions
Menu Item Default Setting (Choices) Current Setting
Alarm No. 1
No Action (Preset 1-96 / Pattern 1-3 / No Action)
Alarm No. 2
No Action (Preset 1-96 / Pattern 1-3 / No Action)
Alarm No. 3
No Action (Preset 1-96 / Pattern 1-3 / No Action)
Alarm No. 4
No Action (Preset 1-96 / Pattern 1-3 / No Action)
Send Inputs to Host Yes (Yes / No)
Alarm Input Normal States
Menu Item Default Setting (Choices) Current Setting
Input No. 1 Open (Open / Closed)
Input No. 2 Open (Open / Closed)
Input No. 3 Open (Open / Closed)
Input No. 4 Open (Open / Closed)
Home Position
Menu Item Default Setting (Choices) Current Setting
Home Position
No Action (Preset 1-96 or 64 / Pattern 1-3 / No Action)
Return Time (Mins)* 10 (1 - 60 Minutes)
* Home Position must be set to Preset or Pattern for this setting to apply.
Area Boundaries
Up to 16 areas can be programmed. Use this form to identify the start and end points of each area. This will assist you in restoring the boundaries if the areas should
be erased.
Area Number Start Point End Point
Area 1
Area 2
Area 3
Area 4
Area 5
Area 6
Area 7
Area 8
Area 9
Area 10
Area 11
Area 12
Area 13
Area 14
Area 15
Area 16
Vista de pagina 60
1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 75 76

Comentarios a estos manuales

Sin comentarios