Sensormatic SpeedDome Ultra IV Manual del operador descargar pdf (Pagina 46)

On-Screen Text Display Settings 5-5

NAME CONFIGURATION MENU

EXIT

OFF

CAMERA NAME

OFFAREA NAME

OFFPRESET NAME

OFFPATTERN NAME

ALARM NAME

FOCUS FAR to program name

RESET PROGRAMMABLE NAMES

Figure 5-4: Name Configuration Screen

You can choose to enable or disable the display of camera, area, preset, pattern, and alarm

names from this screen. You can reset all programmable names to their default settings. You

can also initiate name programming from this screen (see Assigning or Changing Name

Information on page 5-7).

To change the display of a name:

1. Select On-Screen Text Display from the Dome Configuration Menu.

2. Use the Tilt control to move the highlight bar to Name Configuration Menu. Then press

Focus Far.

The Name Configuration Menu appears.

3. Use the Tilt control to move the highlight bar to the item whose display setting you want

to change.

4. Press Zoom In or Zoom Out to change the setting.

• If you want the name to appear on the monitor, choose On.

• If you do not want the name to appear on the monitor, choose Off.

The default settings are Off for Camera, Areas, Presets, and Patterns, and

On for Alarms.

5. Repeat steps 3 and 4 for each item you want to change.

6. Do one of the following:

• If you want to reset all programmable names to their default values, use the Tilt

control to move the highlight bar to Reset Programmable Names, then press

Focus Far. Continue with step 7.

• If you do not want to reset the programmable names, continue with step 8.

7. The following prompt appears on the screen:

RESET PROGRAMMABLE NAMES NO

Highlight Bar:

Move with Tilt

control. Press

Focus Far to

chan

e name.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 75 76

Sin comentarios

Sensormatic SpeedDome Ultra IV Manual del operador Pagina 46